Zebra Technologies
ZTC ZT410-203dpi ZPL

View Printer Configuration

  +19.0               DARKNESS          
  8.0 IPS             PRINT SPEED       
  +000                TEAR OFF ADJUST   
  TEAR OFF            PRINT MODE        
  GAP/NOTCH           MEDIA TYPE        
  TRANSMISSIVE        SENSOR SELECT     
  THERMAL-TRANS.      PRINT METHOD      
  812                 PRINT WIDTH       
  1341                LABEL LENGTH      
  41000-71/1804-01003 PRINT HEAD ID     
  39.0IN   988MM      MAXIMUM LENGTH    
  MAINT. OFF          EARLY WARNING     
  NOT CONNECTED       USB COMM.         
  BIDIRECTIONAL       PARALLEL COMM.    
  RS232               SERIAL COMM.      
  9600                BAUD              
  8 BITS              DATA BITS         
  NONE                PARITY            
  XON/XOFF            HOST HANDSHAKE    
  NONE                PROTOCOL          
  NORMAL MODE         COMMUNICATIONS    
  <~>  7EH            CONTROL PREFIX    
  <^>  5EH            FORMAT PREFIX     
  <,>  2CH            DELIMITER CHAR    
  ZPL II              ZPL MODE          
  INACTIVE            COMMAND OVERRIDE  
  CALIBRATION         MEDIA POWER UP    
  CALIBRATION         HEAD CLOSE        
  DEFAULT             BACKFEED          
  +000                LABEL TOP         
  +0000               LEFT POSITION     
  DISABLED            REPRINT MODE      
  057                 WEB SENSOR        
  080                 MEDIA SENSOR      
  042                 RIBBON SENSOR     
  255                 TAKE LABEL        
  085                 MARK SENSOR       
  035                 MARK MED SENSOR   
  002                 TRANS GAIN        
  017                 TRANS BASE        
  055                 TRANS LED         
  001                 RIBBON GAIN       
  011                 MARK GAIN         
  100                 MARK LED          
  DPCSWFXM            MODES ENABLED     
  ........            MODES DISABLED    
   832 8/MM FULL      RESOLUTION        
  5.0                 LINK-OS VERSION   
  V75.20.10Z <-       FIRMWARE          
  1.3                 XML SCHEMA        
  6.5.0 18.99         HARDWARE ID       
  4096k............R: RAM               
  65536k...........E: ONBOARD FLASH     
  NONE                FORMAT CONVERT    
  FW VERSION          IDLE DISPLAY      
  06/06/25            RTC DATE          
  01:49               RTC TIME          
  DISABLED            ZBI               
  2.1                 ZBI VERSION       
  READY               ZBI STATUS        
  118,070 LABELS      NONRESET CNTR     
  118,070 LABELS      RESET CNTR1       
  118,070 LABELS      RESET CNTR2       
  806,757 IN          NONRESET CNTR     
  806,757 IN          RESET CNTR1       
  806,757 IN          RESET CNTR2       
  2,049,164 CM        NONRESET CNTR     
  2,049,164 CM        RESET CNTR1       
  2,049,164 CM        RESET CNTR2       
  *** EMPTY           SLOT 1            
  *** EMPTY           SLOT 2            
  0                   MASS STORAGE COUNT
  0                   HID COUNT         
  OFF                 USB HOST LOCK OUT